Cargando…

Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards

The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) wh...

Descripción completa

Detalles Bibliográficos
Autores principales: Sanz-Cortiella, Ricardo, Llorens-Calveras, Jordi, Rosell-Polo, Joan R., Gregorio-Lopez, Eduard, Palacin-Roca, Jordi
Formato: Online Artículo Texto
Lenguaje:English
Publicado: Molecular Diversity Preservation International (MDPI) 2011
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3231636/
https://www.ncbi.nlm.nih.gov/pubmed/22163765
http://dx.doi.org/10.3390/s110302751
_version_ 1782218252659720192
author Sanz-Cortiella, Ricardo
Llorens-Calveras, Jordi
Rosell-Polo, Joan R.
Gregorio-Lopez, Eduard
Palacin-Roca, Jordi
author_facet Sanz-Cortiella, Ricardo
Llorens-Calveras, Jordi
Rosell-Polo, Joan R.
Gregorio-Lopez, Eduard
Palacin-Roca, Jordi
author_sort Sanz-Cortiella, Ricardo
collection PubMed
description The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels.
format Online
Article
Text
id pubmed-3231636
institution National Center for Biotechnology Information
language English
publishDate 2011
publisher Molecular Diversity Preservation International (MDPI)
record_format MEDLINE/PubMed
spelling pubmed-32316362011-12-07 Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards Sanz-Cortiella, Ricardo Llorens-Calveras, Jordi Rosell-Polo, Joan R. Gregorio-Lopez, Eduard Palacin-Roca, Jordi Sensors (Basel) Article The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels. Molecular Diversity Preservation International (MDPI) 2011-03-02 /pmc/articles/PMC3231636/ /pubmed/22163765 http://dx.doi.org/10.3390/s110302751 Text en © 2011 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/).
spellingShingle Article
Sanz-Cortiella, Ricardo
Llorens-Calveras, Jordi
Rosell-Polo, Joan R.
Gregorio-Lopez, Eduard
Palacin-Roca, Jordi
Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title_full Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title_fullStr Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title_full_unstemmed Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title_short Characterisation of the LMS200 Laser Beam under the Influence of Blockage Surfaces. Influence on 3D Scanning of Tree Orchards
title_sort characterisation of the lms200 laser beam under the influence of blockage surfaces. influence on 3d scanning of tree orchards
topic Article
url https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3231636/
https://www.ncbi.nlm.nih.gov/pubmed/22163765
http://dx.doi.org/10.3390/s110302751
work_keys_str_mv AT sanzcortiellaricardo characterisationofthelms200laserbeamundertheinfluenceofblockagesurfacesinfluenceon3dscanningoftreeorchards
AT llorenscalverasjordi characterisationofthelms200laserbeamundertheinfluenceofblockagesurfacesinfluenceon3dscanningoftreeorchards
AT rosellpolojoanr characterisationofthelms200laserbeamundertheinfluenceofblockagesurfacesinfluenceon3dscanningoftreeorchards
AT gregoriolopezeduard characterisationofthelms200laserbeamundertheinfluenceofblockagesurfacesinfluenceon3dscanningoftreeorchards
AT palacinrocajordi characterisationofthelms200laserbeamundertheinfluenceofblockagesurfacesinfluenceon3dscanningoftreeorchards