Membrane Bioincompatibility and Ultrafiltration Effects on Pulse Wave Analysis during Haemodialysis

Membrane bioincompatibility was demonstrated by successive white blood cell counts and C3a generation. Pulse wave analysis was obtained by applanation tonometry (SphygmoCor) in a sequential way: basal, after 30 minutes with nul ultrafiltration, and after a complete dialysis with ultrafiltration. At 15 minutes of haemodialysis, significant decrease in leukocyte count occurred: 6801 ± 1186 versus 4412 ± 1333 (P < 0.001), while C3a levels sharply increased from 427 ± 269 to 3501 ± 1638 ng/mL (P < 0.000). No changes were observed in augmentation index without ultrafiltration: 26.1 ± 11.1 versus 26.6 ± 12.4. Only aortic systolic blood pressure was lower at 15 minutes: 120.1 ± 17.7 versus 110.4 ± 25.8 mmHg (P = 0.009), in agreement with a reduction in brachial systolic blood pressure: 135.1 ± 18.1 versus 122.7 ± 27.4 mmHg (P = 0.01), without changes in aortic or brachial diastolic blood pressure. Important changes in pulse wave analysis were observed after a complete haemodialysis session: augmentation index 29.9 ± 10.1 versus 18.6 ± 15.0, aortic systolic blood pressure 139.8 ± 25.5 versus 119.4 ± 28.5 mmHg (P < 0.00), without changes in aortic diastolic blood pressure. In summary, haemodialysis with cellulose diacetate acutely induced a transient state of immunoactivation due to bioincompatibility, this phenomenon was nondetectable by pulse wave analysis. Complete haemodialysis session led to important changes in pulse wave analysis.