Cargando…
Phase relations in the Nb–Ni–Cr system at 1,100 °C
ABSTRACT: The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb(7)Ni(6)) at this temperature, and the solubility of chromium...
Autores principales: | , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
Springer Vienna
2012
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4494769/ https://www.ncbi.nlm.nih.gov/pubmed/26166873 http://dx.doi.org/10.1007/s00706-012-0750-4 |
Sumario: | ABSTRACT: The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb(7)Ni(6)) at this temperature, and the solubility of chromium in NbNi(3) is approximately 5 at.%. Under these circumstances the low-temperature (cubic) modification of the NbCr(2) Laves phase can dissolve up to 6 at.% of nickel, but further increase of the Ni content (up to approximately 10 at.%) stabilizes the hexagonal (high-temperature) modification of the Laves phase. The presence of this pseudo-ternary compound which is in equilibrium with all binary intermetallics and body-centred cubic (BCC) Nb- and Cr-based solid solutions largely determines the topology of the isotherm at 1,100 °C. The formation of this phase was also observed in the reaction zone between Nb and Ni–Cr solid solution when chromium concentration exceeded 15 at.%. GRAPHICAL ABSTRACT: [Image: see text] |
---|