Cargando…
Custom fabrication of reinforced lithium disilicate ceramic ingot
A method of formulating a reinforcement lithium disilicate ceramic ingot was proposed. The ceramic ingot was broken manually with a mallet to finer particles. The sectioned ingot is ball milled along with 10% of nano zirconia by weight to obtain the desired powder. The reinforced powder is condensed...
| Autores principales: | , , , |
|---|---|
| Formato: | Online Artículo Texto |
| Lenguaje: | English |
| Publicado: |
Medknow Publications & Media Pvt Ltd
2016
|
| Materias: | |
| Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4836100/ https://www.ncbi.nlm.nih.gov/pubmed/27134457 http://dx.doi.org/10.4103/0975-962X.179376 |
| Sumario: | A method of formulating a reinforcement lithium disilicate ceramic ingot was proposed. The ceramic ingot was broken manually with a mallet to finer particles. The sectioned ingot is ball milled along with 10% of nano zirconia by weight to obtain the desired powder. The reinforced powder is condensed in a 5 ml disposable syringe by powder slurry technique. The compacted ceramic were sintered at 900°C to obtain ceramic ingots. The reinforced ceramic ingots were used in pressable ceramic machines to obtain the desired advantages of zirconia reinforcement and pressable ceramic system. |
|---|