Understanding surface structure and chemistry of single crystal lanthanum aluminate

The surface crystallography and chemistry of a LaAlO(3) single crystal, a material mainly used as a substrate to deposit technologically important thin films (e.g. for superconducting and magnetic devices), was analysed using surface X-ray diffraction and low energy ion scattering spectroscopy. The surface was determined to be terminated by Al-O species, and was significantly different from the idealised bulk structure. Termination reversal was not observed at higher temperature (600 °C) and chamber pressure of 10(−10) Torr, but rather an increased Al-O occupancy occurred, which was accompanied by a larger outwards relaxation of Al from the bulk positions. Changing the oxygen pressure to 10(−6) Torr enriched the Al site occupancy fraction at the outermost surface from 0.245(10) to 0.325(9). In contrast the LaO, which is located at the next sub-surface atomic layer, showed no chemical enrichment and the structural relaxation was lower than for the top AlO(2) layer. Knowledge of the surface structure will aid the understanding of how and which type of interface will be formed when LaAlO(3) is used as a substrate as a function of temperature and pressure, and so lead to improved design of device structures.