Manual ventilation and open suction procedures contribute to negative pressures in a mechanical lung model

INTRODUCTION: Removal of pulmonary secretions in mechanically ventilated patients usually requires suction with closed catheter systems or flexible bronchoscopes. Manual ventilation is occasionally performed during such procedures if clinicians suspect inadequate ventilation. Suctioning can also be performed with the ventilator entirely disconnected from the endotracheal tube (ETT). The aim of this study was to investigate if these two procedures generate negative airway pressures, which may contribute to atelectasis. METHODS: The effects of device insertion and suctioning in ETTs were examined in a mechanical lung model with a pressure transducer inserted distal to ETTs of 9 mm, 8 mm and 7 mm internal diameter (ID). A 16 Fr bronchoscope and 12, 14 and 16 Fr suction catheters were used at two different vacuum levels during manual ventilation and with the ETTs disconnected. RESULTS: During manual ventilation with ETTs of 9 mm, 8 mm and 7 mm ID, and bronchoscopic suctioning at moderate suction level, peak pressure (P(PEAK)) dropped from 23, 22 and 24.5 cm H(2)O to 16, 16 and 15 cm H(2)O, respectively. Maximum suction reduced P(PEAK) to 20, 17 and 11 cm H(2)O, respectively, and the end-expiratory pressure fell from 5, 5.5 and 4.5 cm H(2)O to –2, –6 and –17 cm H(2)O. Suctioning through disconnected ETTs (open suction procedure) gave negative model airway pressures throughout the duration of the procedures. CONCLUSIONS: Manual ventilation and open suction procedures induce negative end-expiratory pressure during endotracheal suctioning, which may have clinical implications in patients who need high PEEP (positive end-expiratory pressure).