Potential of 3D printing technologies for fabrication of electron bolus and proton compensators

In electron and proton radiotherapy, applications of patient‐specific electron bolus or proton compensators during radiation treatments are often necessary to accommodate patient body surface irregularities, tissue inhomogeneity, and variations in PTV depths to achieve desired dose distributions. Emerging 3D printing technologies provide alternative fabrication methods for these bolus and compensators. This study investigated the potential of utilizing 3D printing technologies for the fabrication of the electron bolus and proton compensators. Two printing technologies, fused deposition modeling (FDM) and selective laser sintering (SLS), and two printing materials, PLA and polyamide, were investigated. Samples were printed and characterized with CT scan and under electron and proton beams. In addition, a software package was developed to convert electron bolus and proton compensator designs to printable Standard Tessellation Language file format. A phantom scalp electron bolus was printed with FDM technology with PLA material. The HU of the printed electron bolus was [Formula: see text]. A prostate patient proton compensator was printed with SLS technology and polyamide material with [Formula: see text] HU. The profiles of the electron bolus and proton compensator were compared with the original designs. The average over all the CT slices of the largest Euclidean distance between the design and the fabricated bolus on each CT slice was found to be [Formula: see text] and for the compensator to be [Formula: see text]. It is recommended that the properties of specific 3D printed objects are understood before being applied to radiotherapy treatments. PACS number: 81.40