Cargando…

An anthropomorphic beating heart phantom for cardiac X‐ray CT imaging evaluation

The current work describes an anthropomorphic beating heart phantom constructed as a tool for the assessment of technological advances in cardiac X‐ray computed tomography (CT). The phantom is comprised of a thorax, a compressor system, an ECG system, a beating heart with tortuous coronary arteries,...

Descripción completa

Detalles Bibliográficos
Autores principales:	Boltz, Thomas, Pavlicek, William, Paden, Robert, Renno, Markus, Jensen, Angela, Akay, Metin
Formato:	Online Artículo Texto
Lenguaje:	English
Publicado:	John Wiley and Sons Inc. 2010
Materias:	Medical Imaging
Acceso en línea:	https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5719788/ https://www.ncbi.nlm.nih.gov/pubmed/20160697 http://dx.doi.org/10.1120/jacmp.v11i1.3129

Ejemplares similares

Coronary calcium quantification using contrast‐enhanced dual‐energy computed tomography scans
por: Yamak, Didem, et al.
Publicado: (2013)

Relationship between the radiation doses at nonenhanced CT studies using different tube voltages and automatic tube current modulation during anthropomorphic phantoms of young children
por: Masuda, Takanori, et al.
Publicado: (2017)

Development of a universal medical X‐ray imaging phantom prototype
por: Groenewald, Annemari, et al.
Publicado: (2016)

Creation of an anthropomorphic CT head phantom for verification of image segmentation
por: Holmes, Robin B., et al.
Publicado: (2020)

Automatic Synthesis of Anthropomorphic Pulmonary CT Phantoms
por: Jimenez-Carretero, Daniel, et al.
Publicado: (2016)

Fully automated quantification method (FQM) of coronary calcium in an anthropomorphic phantom
por: van Praagh, Gijs D., et al.
Publicado: (2021)

Effect of reconstruction methods and x-ray tube current–time product on nodule detection in an anthropomorphic thorax phantom: A crossed-modality JAFROC observer study
por: Thompson, J. D., et al.
Publicado: (2016)

Tunable blood oxygenation in the vascular anatomy of a semi-anthropomorphic photoacoustic breast phantom
por: Dantuma, Maura, et al.
Publicado: (2021)

Anthropomorphic Phantoms for Confirmation of Linear Accelerator-Based Small Animal Irradiation
por: Perks, Julian R, et al.
Publicado: (2015)

Radiographic and fluoroscopic X‐ray systems: Quality control of the X‐ray tube and automatic exposure control using theoretical spectra to determine air kerma and dose to a homogenous phantom
por: Konst, Bente, et al.
Publicado: (2021)

Reliability of CT‐based texture features: Phantom study
por: Varghese, Bino A., et al.
Publicado: (2019)

Scanner and kVp dependence of measured CT numbers in the ACR CT phantom
por: Cropp, Robert J., et al.
Publicado: (2013)

Method and phantom to study combined effects of in‐plane (x,y) and z‐axis resolution for 3D CT imaging
por: Goodenough, David, et al.
Publicado: (2016)

Performance evaluation of iterative reconstruction algorithms for achieving CT radiation dose reduction — a phantom study
por: Dodge, Cristina T., et al.
Publicado: (2016)

Evaluation of image lag in a flat‐panel, detector‐equipped cardiovascular X‐ray machine using a newly developed dynamic phantom
por: Sato, Hisaya, et al.
Publicado: (2015)

100 days with scans of the same Catphan phantom on the same CT scanner
por: Husby, Ellen, et al.
Publicado: (2017)

A measurement‐based X‐ray source model characterization for CT dosimetry computations
por: Sommerville, Mitchell, et al.
Publicado: (2015)

Development and applicability of a quality control phantom for dental cone‐beam CT
por: Pauwels, Ruben, et al.
Publicado: (2011)

Lower limit of iron quantification using dual‐energy CT — a phantom study
por: Jiang, Xia, et al.
Publicado: (2020)

Investigating the feasibility of generating dual‐energy CT from one 120‐kVp CT scan: a phantom study
por: Huang, Wen‐Hui, et al.
Publicado: (2020)

Dose reduction in CT urography and vasculature phantom studies using model‐based iterative reconstruction
por: Page, Leland, et al.
Publicado: (2016)

Development of a method to create uniform phantoms for task‐based assessment of CT image quality
por: Conzelmann, Juliane, et al.
Publicado: (2020)

Comparative performance analysis for abdominal phantom ROI detectability according to CT reconstruction algorithm: ADMIRE
por: Shin, Jun‐Bong, et al.
Publicado: (2019)

A calibration CT mini‐lung‐phantom created by 3‐D printing and subtractive manufacturing
por: Guo, H. Henry, et al.
Publicado: (2021)

Evaluation of a commercial cardiac motion phantom for dual‐energy chest radiography
por: Hsieh, Ching‐Yi, et al.
Publicado: (2014)

Radiation dose reduction for CT lung cancer screening using ASIR and MBIR: a phantom study
por: Mathieu, Kelsey B., et al.
Publicado: (2014)

Evaluation of automatic tube current modulation of CT scanners using a dedicated and the CTDI dosimetry phantoms
por: Tsalafoutas, Ioannis A., et al.
Publicado: (2022)

Radiation dose reduction in thoracic and abdomen–pelvic CT using tube current modulation: a phantom study
por: Sabarudin, Akmal, et al.
Publicado: (2014)

Evaluation of projection‐ and dual‐energy‐based methods for metal artifact reduction in CT using a phantom study
por: Long, Zaiyang, et al.
Publicado: (2018)

Image quality improvement with deep learning‐based reconstruction on abdominal ultrahigh‐resolution CT: A phantom study
por: Shirasaka, Takashi, et al.
Publicado: (2021)

Construction of anthropomorphic phantoms for use in dosimetry studies
por: Winslow, James F., et al.
Publicado: (2009)

Anthropomorphic Breast and Head Phantoms for Microwave Imaging
por: Joachimowicz, Nadine, et al.
Publicado: (2018)

X-ray interferometry without analyzer for breast CT application: a simulation study
por: Xu, Jingzhu, et al.
Publicado: (2020)

Quality control of radiomic features using 3D-printed CT phantoms
por: Mahmood, Usman, et al.
Publicado: (2021)

Real‐time, ray casting‐based scatter dose estimation for c‐arm x‐ray system
por: Alnewaini, Zaid, et al.
Publicado: (2017)

A 4D CT digital phantom of an individual human brain for perfusion analysis
por: Manniesing, Rashindra, et al.
Publicado: (2016)

An algorithm for automated modulation transfer function measurement using an edge of a PMMA phantom: Impact of field of view on spatial resolution of CT images
por: Anam, Choirul, et al.
Publicado: (2018)

Increasing iterative reconstruction strength at low tube voltage in coronary CT angiography protocols using 3D‐printed and Catphan(®) 500 phantoms
por: Abdullah, Kamarul A., et al.
Publicado: (2020)

Anthropomorphic breast phantoms for quality assurance and dose verification
por: Bencomo, José A., et al.
Publicado: (2004)

Comparison of organ and effective dose estimations from different Monte Carlo simulation‐based software methods in infant CT and comparison with direct phantom measurements
por: Lawson, Michael, et al.
Publicado: (2022)

Cannot write session to /tmp/vufind_sessions/sess_s6d9iru5vauif3dvlorc2cgf48