Cargando…

Elasto-Plastic Mechanical Properties and Failure Mechanism of Innovative Ti-(SiC(f)/Al(3)Ti) Laminated Composites for Sphere-Plane Contact at the Early Stage of Penetration Process

A novel silicon carbide (SiC) continuous ceramic fiber-reinforced (CCFR) Ti/Al(3)Ti Metal-Intermetallic-Laminate (MIL) composite was fabricated. A high-efficiency semi-analytical model was proposed based on the numerical equivalent inclusion method (NEIM) for analyzing the small-strain elasto-plasti...

Descripción completa

Detalles Bibliográficos
Autores principales: Liu, Jingchuan, Zhang, Lan, Jiang, Fengchun, Zhang, Mengqi, Wang, Liquan, Yun, Feihong
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2018
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6073556/
https://www.ncbi.nlm.nih.gov/pubmed/29986419
http://dx.doi.org/10.3390/ma11071152
Descripción
Sumario:A novel silicon carbide (SiC) continuous ceramic fiber-reinforced (CCFR) Ti/Al(3)Ti Metal-Intermetallic-Laminate (MIL) composite was fabricated. A high-efficiency semi-analytical model was proposed based on the numerical equivalent inclusion method (NEIM) for analyzing the small-strain elasto-plastic contact in the early stage of the penetration process. The microstructure and interface features were characterized by the scanning electron microscopy (SEM). Quasi-static compression tests were performed to determine the contact response and validate the proposed model. A group of in-depth parametric studies were carried out to quantify the influence of the microstructure. The comparison between results under the sphere-plane and plane-plane contact load indicates that, under the first sphere-plane, the compressive strength and failure strain are both lower and the SiC reinforcement effect on strength is very clear while the effect on ductility is not clear. The maximum plastic strain concentration (MPSC) in the Al(3)Ti layer is closest to the upper boundary of the central SiC fiber and then extends along the depth direction as the load increases, which are also the locations where cracks may initiate and extend. Moreover, the CCFR-MIL composite shows better mechanical properties when the center distance between adjacent SiC fibers is four times the fiber diameter and the volume fraction of Ti is 40%.