An Electrochemiluminescence Sensor Based on Nafion/Magnetic Fe(3)O(4) Nanocrystals Modified Electrode for the Determination of Bisphenol A in Environmental Water Samples

The well-dispersive and superparamagnetic Fe(3)O(4)-nanocrystals (Fe(3)O(4)-NCs) which could significantly enhance the anodic electrochemiluminescence (ECL) behavior of luminol, were synthesized in this study. Compared to ZnS, ZnSe, CdS and CdTe nanoparticles, the strongest anodic ECL signals were obtained at +1.6 V on the Fe(3)O(4)-NCs coated glassy carbon electrode. The ECL spectra revealed that the strong ECL resonance energy transfer occurred between luminol and Fe(3)O(4)-NCs. Furthermore, under the optimized ECL experimental conditions, such as the amount of Fe(3)O(4)-NCs, the concentration of luminol and the pH of supporting electrolyte, BPA exhibited a stronger distinct ECL quenching effect than its structural analogs and a highly selective and sensitive ECL sensor for the determination of bisphenol A (BPA) was developed based on the Fe(3)O(4)-NCs. A good linear relationship was found between the ECL intensity and the increased BPA concentration within 0.01–5.0 mg/L, with a correlation coefficient of 0.9972. The detection limit was 0.66 × 10(−3) mg/L. Good recoveries between 96.0% and 105.0% with a relative standard deviation of less than 4.8% were obtained in real water samples. The proposed ECL sensor can be successfully employed to BPA detection in environmental aqueous samples.