The Effect of the Use of Different Types of Cement and Zirconium Post Systems on Endondontically Treated Teeth

BACKGROUND: Prefabricated zirconium upgrading systems were examined to satisfy aesthetic needs in endodontically treated teeth. Endodontically treated teeth, together with non-metallic posts and superstructure, are substructures that enable the production of prosthetic structures that will allow aesthetics, resulting from normal light transmission. To investigate and analyse the retention of zirconium post systems cemented with RelyX Unicem 2 Automix (RLX) cement with Pull-out test. AIM: To examine the retention of zirconium post systems, cemented with Multi-Link Automix (MLA) cement and RelyX Unicem 2 Automix (RLX) cement with Pull-out test. MATERIAL AND METHODS: In this study were used, 120 post systems of the company ZIRIX NORDIN - Switzerland, with different diameters d1 = 1.2, were used: d2 = 1.35, d3 = 1.5, and two types of resin cements: Multilink Automix-Ivoclar (MLA), and RelyX Unicem 2 Automix (RLX) - 3 M ESPE. RESULTS: The analysis of the extraction force in newtons (N) zirconium post systems of Multilink Automix cement according to subgroups of three diameters is consequently 481.3 ± 1.9 vs 462.9 ± 4.5 vs 454.2 ± 2.2. The analysis of the extraction strength in the newtons (N) zirconium post systems of RelyX Unicem 2 Automix cement in the entire sample is 577.9 ± 6.1 N. CONCLUSION: The largest diameter of the posts significantly increases the resistance of fractures compared to the smaller two diameters used in the experimental study.