A novel patient-specific three-dimensional-printed external template to guide iliosacral screw insertion: a retrospective study

BACKGROUND: Iliosacral screw fixation is a popular method for the management of posterior pelvic ring fractures or dislocations, providing adequate biomechanical stability. Our aim in this study was to describe the use of a new patient-specific external template to guide the insertion of iliosacral screws and to evaluate the efficacy and safety of this technique compared with the conventional fluoroscopy-guided technique. METHODS: This was a retrospective study of patients with incomplete or complete posterior pelvic ring disruptions who required iliosacral screw fixation. For analysis, patients were divided into two groups: the external template group (37 screws in 22 patients) and the conventional group (28 screws in 18 patients). The operative time per screw, radiation exposure time and the rate of screw perforation (accuracy) were compared between groups. In the external template group, the difference between the actual and planned iliosacral screw position was also compared. RESULTS: In the conventional group, the average operative time per screw was 39.7 ± 10.6 min, with an average radiation exposure dose of 1904.0 ± 844.5 cGy/cm(2), with 4 cases of screw perforation. In the external template group, the average operative time per screw was 17.9 ± 4.7 min, with an average radiation exposure dose of 742.8 ± 230.6 cGy/cm(2) and 1 case of screw perforation. In the template group, the mean deviation distance between the actual and planned screw position was 2.75 ± 1.0 mm at the tip, 1.83 ± 0.67 mm in the nerve root tunnel zone and 1.52 ± 0.48 mm at the entry point, with a mean deviation angle of 1.73 ± 0.80°. CONCLUSIONS: The external template provides an accurate and safe navigation tool for percutaneous iliosacral screw insertion that could decrease the operative time and radiation exposure.