Effect of Curing Agent and Temperature on the Rheological Behavior of Epoxy Resin Systems

The effect of curing agent (6610) content and temperature on the rheological behavior of the epoxy resin CYD-128 was studied by DSC analysis and viscosity experiments. The results show that the resin system meets the requirements of processing technology. A complete reaction occurs when the curing agent content (40 parts per hundred resin, phr) is a little higher than the theoretical value (33.33 phr), while the degree of reaction of the resin system is reduced when the curing agent content is lower (25.00 phr) than theoretical value. However, excessive curing agent (50.00 phr) results in a lower reaction rate. Curing agent content has little influence on gel time when curing agent content exceeded 33.33 phr and the temperature was less than 70 °C. The isothermal viscosity-time curves shift towards the –x axis when the temperature rises from 50 °C to 80 °C. Meanwhile, higher temperature results in higher reaction rates.