The Formation of a Modified Surface Layer on Elastomeric Materials

Surface modification of an elastomer may be formed during sliding contact with a rigid counter surface. This alteration leads to a change of mechanical properties at the surface and as a result a change in frictional behavior. Therefore, investigations related to the formation of a modified surface layer on elastomers and its effect on friction are of importance. In the present study, the formation of a modified surface layer on elastomer reinforced by silica is studied. Sliding friction is performed using a pin-on-disc tribometer. Several parameters are varied, namely contact pressure, velocity, and roughness of the counter surface. The existence of a modified surface layer is investigated by using a scanning electron microscope. The results show that the existence of a modified surface layer depends on the competition between the formation rate of the layer and the wear rate. The formation of the layer depends on the contact pressure, velocity, and sliding distance. A general formulation to calculate the volume of formation is proposed. Furthermore, a map of the formation of a modified surface layer is developed.