Influence of Ethylene Glycol Methacrylate to the Hydration and Transition Behaviors of Thermo-Responsive Interpenetrating Polymeric Network Hydrogels

The influence of ethylene glycol methacrylate (EGMA) to the hydration and transition behaviors of thermo-responsive interpenetrating polymeric network (IPN) hydrogels containing sodium alginate, N-isopropylacrylamide (NIPAAm), and EGMA were investigated. The molar ratios of NIPAAm and EGMA were varied from 20:0 to 19.5:0.5 and 18.5:1.5 in the thermo-responsive alginate-Ca(2+)/P(NIPAAm-co-EGMA) IPN hydrogels. Due to the more hydrophilicity and high flexibility of EGMA, the IPN hydrogels exhibited higher lower critical solution temperature (LCST) and lower glass transition temperature (T(g)) when the ratio of EGMA increases. The swelling/deswelling kinetics of the IPN hydrogels could be controlled by adjusting the NIPAAm/EGMA molar ratio. A faster water uptake rate and a slower water loss rate could be realized by increase the amount of EGMA in the IPN hydrogel (the shrinking rate constant was decreased from 0.01207 to 0.01195 and 0.01055 with the changing of NIPAAm/EGMA ratio from 20:0, 19.5:0.5 to 18.5:1.5). By using 2-Isopropylthioxanthone (ITX) as a photo initiator, the obtained alginate-Ca(2+)/P(NIPAAm-co-EGMA(360)) IPN hydrogels were successfully immobilized on cotton fabrics. The surface and cross section of the hydrogel were probed by scanning electron microscopy (SEM). They all exhibited a porous structure, and the pore size was increased with the amount of EGMA. Moreover, the LCST values of the fabric-grafted hydrogels were close to those of the pure IPN hydrogels. Their thermal sensitivity remained unchanged. The cotton fabrics grafted with hydrogel turned out to be much softer with the continuous increase of EGMA amount. Therefore, compared with alginate-Ca(2+)/PNIPAAm hydrogel, alginate-Ca(2+)/P(NIPAAm-co-EGMA(360)) hydrogel is a more promising candidate for wound dressing in the field of biomedical textile.