Effect of Vietnamese Fly Ash on Selected Physical Properties, Durability and Probability of Corrosion of Steel in Concrete

Vietnamese fly ash was used as a partial replacement for ordinary Portland cement in the proportions of 10%, 20% and 40%, while the water to cementitious ratios were kept constant at 0.42, 0.5 and 0.55, respectively, for three groups. The compressive strengths of all mixes were determined up to 90 days. The acid resistance of fly ash concrete was examined by the mass loss and compressive strength loss of 100 × 100 × 100 mm(3) cubes immersed in a 10% H(2)SO(4) solution. The probability of steel corrosion in the fly ash concrete was assessed by measuring the half-cell potentials of steel bars within beams dimensions of 100 × 100 × 500 mm(3), and the flexural strengths of these beams after 300 days of immersion in a 5% NaCl solution were determined. The results demonstrate that the compressive strength of fly ash concrete is reduced at an early age but increases as the concrete continues to hydrate. The fly ash increases the sulfuric acid resistance of concrete. Fly ash additions have only a limited effect on reducing the risk of probability of corrosion of steel in the concrete. The load capacities of 10% and 20% fly ash reinforced concrete beams are higher than that of the control beams after 300 days immersed in a 5% NaCl solution.