New Type of Sodium Alginate-g-acrylamide Polyelectrolyte Obtained by Electron Beam Irradiation: Characterization and Study of Flocculation Efficacy and Heavy Metal Removal Capacity

The goals of the paper were first the obtainment and characterization of sodium alginate-g-acrylamide polyelectrolytes by electron beam irradiation in the range of 0.5 to 2 kGy, and second, the evaluation of flocculation efficacy and heavy metal removal capacity from aqueous solutions of known concentrations. Based on sodium alginate concentration, two types of grafted polymers were obtained. Physical, chemical, and structural investigations were performed. Flocculation studies under different stirring conditions on 0.5, 0.1 and 0.2% kaolin suspension were done. The removal capacity of Cu(2+) and Cr(6+) ions was also investigated. The acrylamide grafting ratio on sodium alginate backbone was found up to 2000% for samples containing 1% sodium alginate and up to 500% for samples containing 2% sodium alginate. Transmittances between 98 and 100% were obtained using, in the flocculation studies, polyelectrolytes containing 2% sodium alginate in concentrations of 0.5 and 1 ppm on kaolin suspension of 0.1 wt %. The polymer concentration was found critical for kaolin suspension of 0.05 and 0.1 wt %. Polymers containing 1% sodium alginate were efficient in Cr(6+) ion removal, while those containing 2% in Cu(2+) ion removal.