High Accuracy and Miniature 2-D Wind Sensor for Boundary Layer Meteorological Observation †

Wind speed and direction are important parameters in meteorological observation. A solid wind sensor is needed with a small quadcopter for boundary layer meteorological observation. In this paper, the principle of a cylindrical two-dimensional wind sensor is reported and the data from wind tunnel experiments are analyzed. A model is proposed to describe the distribution of the pressure difference across a diameter of a cylinder, and the wind sensor is fabricated with MEMS (Micro-Electro-Mechanical System) differential pressure sensors. The wind sensor cylinder has a small size with a diameter of 30 mm and a height of 80 mm. In wind tunnel tests in the range of 1 to 40 m/s, the relative speed measuring errors and the direction measuring errors of the prototype are no more than ± (0.2 + 0.03 V) m/s (V is standard wind speed) and 5°, respectively. An inclination angle model is proposed to correct the influence of tilt angle on the quadcopter platform, the wind sensor can maintain the original wind speed and direction measurement accuracy within the 30° inclination range after compensation.