Electrochemical Polymerization of Hydroquinone on Graphite Felt as a Pseudocapacitive Material for Application in a Microbial Fuel Cell

Here we reported the use of electropolymerization to achieve the transformation of aqueous hydroquinone to solid-phase polyhydroquinone (PHQ) with pseudocapacitive characteristics, and the application of this redox-active product to shuttle electron transfer in the anode system of a microbial fuel cell (MFC). The microscopic and spectroscopic results showed that the treatment of the graphite felt (GF) substrate with acids was effective in improving the amounts of surface-bound oxygen-containing groups, enabling better adhesion of PHQ onto the GF surfaces. The electrochemical measurements indicated that the resulting PHQ–AGF (acid treated GF) possessed high pseudocapacitance due to the fast and reversible redox cycling between hydroquinone and benzoquinone. The MFC equipped with the PHQ–AGF anode achieved a maximum power density of 633.6 mW m(−2), which was much higher than 368.2, 228.8, and 119.7 mW m(−2) corresponding to the MFC with the reference PHQ–GF, AGF, and GF anodes, respectively. The increase in the power performance was attributed to the incorporation of the redox-active PHQ abundant in C–OH and C=O groups that were beneficial to the increased extracellular electron transfer and enhanced bacterial adhesion on the anode.