Synthesis and Mechanism of Metal-Mediated Polymerization of Phenolic Resins

Phenol-formaldehyde (PF) resin is a high performance adhesive, but has not been widely developed due to its slow curing rate and high curing temperature. To accelerate the curing rate and to lower the curing temperature of PF resin, four types of metal-mediated catalysts were employed in the synthesis of PF resin; namely, barium hydroxide (Ba(OH)(2)), sodium carbonate (Na(2)CO(3)), lithium hydroxide (LiOH), and zinc acetate ((CH(3)COO)(2)Zn). The cure-acceleration effects of these catalysts on the properties of PF resins were measured, and the chemical structures of the PF resins accelerated with the catalysts were investigated by using Fourier transform infrared (FT-IR) spectroscopy and quantitative liquid carbon-13 nuclear magnetic resonance ((13)C NMR). The results showed that the accelerated efficiency of these catalysts to PF resin could be ordered in the following sequence: Na(2)CO(3) > (CH(3)COO)(2)Zn > Ba(OH)(2) > LiOH. The catalysts (CH(3)COO)(2)Zn and Na(2)CO(3) increased the reaction activity of the phenol ortho position and the condensation reaction of ortho methylol. The accelerating mechanism of (CH(3)COO)(2)Zn on PF resin is probably different from that of Na(2)CO(3), which can be confirmed by the differences in the differential thermogravimetric (DTG) curve and thermogravimetric (TG) data. Compared to the Na(2)CO(3)-accelerated PF resin, the (CH(3)COO)(2)Zn-accelerated PF resin showed different peaks in the DTG curve and higher weight residues. In the synthesis process, the catalyst (CH(3)COO)(2)Zn may form chelating compounds (containing a metal-ligand bond), which can promote the linkage of formaldehyde to the phenolic hydroxyl ortho position.