Indentation Size Effect in Pressure-Sensitive Polymer Based on A Criterion for Description of Yield Differential Effects and Shear Transformation-Mediated Plasticity

Indentation size effects in poly(methyl methacrylate) (PMMA) were studied through nanoindentation. Two factors of indentation size effects in PMMA, namely yield criterion and shear transformation-mediated plasticity, were analysed in detail. The yield criterion that considers strength differential (SD) effects and pressure sensitivity was constructed by performing the combined shear-compression experiments. The relationship between hardness and normal stress can then be obtained based on Tabot’s relation. Shear transformation-mediated plasticity was also applied to model the measured hardness as a function of the indentation depth at different strain rates. Results show that the yield criterion contains the terms of SD effects and pressure sensitivity gives the best description of the yielding of PMMA. Additionally, the volume of single shear transformation zone calculated through the presented criterion agrees well with simulation and exhibits increases with increasing strain rate. Indentation size effects in PMMA under different strain rates were discussed and an appropriate indentation depth range was suggested for calculating the hardness and modulus.