Microscopic Properties of Hydrogen Peroxide Activated Crumb Rubber and Its Influence on the Rheological Properties of Crumb Rubber Modified Asphalt

Crumb rubber modified (CRM) asphalt binder has been affirmed to improve resistance to rutting, moisture susceptibility, low-temperature cracking, and asphalt durability. However, CRM has poor compatibility with asphalt since crumb rubber molecules are vulcanized. The objective of this study was to develop a new method to prepare activated crumb rubber using hydrogen peroxide (H(2)O(2)) solution and to explore the rheological properties of H(2)O(2) activated CRM (ACRM) asphalt. Three different percentages of H(2)O(2) solution were used to activate crumb rubber. The surface properties of oxidized rubber were analysed using scanning electron microscopy. Moreover, the pore structure in rubber powder was investigated. The rheological properties of bitumen samples obtained from treated and untreated rubber were characterized by conducting dynamic shear rheometer tests. The test results show that the average pore size of the crumb rubber after activation with H(2)O(2) solution is significantly smaller than that of the inactivated crumb rubber, and the volume and surface area of the crumb rubber pores change with H(2)O(2) solution activation in a certain pattern. With the increase in H(2)O(2) solution content, the contact surface between the particles increases, the floccules and pores of the powder increase, and the interface degree between the crumb rubber powder and the asphalt is strengthened. Solubility of the rubber hydrocarbon and the release ability of the carbon black particles from the crumb rubber in the asphalt binder increase, but the mechanical properties of the crumb rubber, including the strength, elasticity, and wear resistance, decrease. As a result, a reduction is observed in the elasticity, viscosity, high-temperature rutting resistance, and elasticity of the ACRM asphalt.