Full-Duplex MAC Protocol for CSMA/CA-Based Single-Hop Wireless Networks

Full-duplex (FD) communication provides new opportunities for improving the throughputs of networks. However, this condition means that the number of senders increases from one to two within a certain range. We have to arrange the two nodes to send frames simultaneously in the media access control (MAC) layer. For the single-hop network model, using the FD features of the nodes and the cut-through mechanism, we propose an FD MAC protocol. The protocol improves the throughput of the network from the following two aspects. On the one hand, during the transmission of each node, based on the information of the received frame’s header, the protocol can detect collisions in the network, preventing the channel from being ineffectively occupied for a long time. On the other hand, the protocol can provide the FD with as many opportunities as possible for the nodes. According to the working process of the protocol, we modeled the states (“active” and “passive” transmission, back-off) of each node and their transitions to a Markov chain. We solved the “active” transmission probability of the node and further modeled the analytical performance of the protocol. The simulation results showed that the system throughput produced by our protocol was at least twice that of the conventional CSMA/CA protocol used in the half-duplex networks.