Cargando…
The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing
To explore the mechanism of the pore formation in the laser-welded vacuum plate glazing sealing layer, a vacuum plate glazing laser side sealing test was carried out. The influence of the pulse current, pulse duration time, pulse frequency and welding speed on the pores of the sealing layer was stud...
Autores principales: | , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2019
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6600737/ https://www.ncbi.nlm.nih.gov/pubmed/31159507 http://dx.doi.org/10.3390/ma12111790 |
_version_ | 1783431176755609600 |
---|---|
author | Zhang, Shanwen Li, Chong Miao, Hong He, Qiang |
author_facet | Zhang, Shanwen Li, Chong Miao, Hong He, Qiang |
author_sort | Zhang, Shanwen |
collection | PubMed |
description | To explore the mechanism of the pore formation in the laser-welded vacuum plate glazing sealing layer, a vacuum plate glazing laser side sealing test was carried out. The influence of the pulse current, pulse duration time, pulse frequency and welding speed on the pores of the sealing layer was studied by means of scanning electron microscopy (SEM) and metallographic microscopy, and the cause of the pores is analyzed. The results show that the porosity decreases with the increase of the pulse current. When the pulse current is 160 A, the pores are the fewest and smallest, and the porosity is only 0.1%. The porosity of the sealing layer decreases first and then increases with the increase of the pulse duration time. The porosity decreases first and then increases with the increase of the pulse frequency. When the pulse frequency is 18 Hz, the porosity is the least, at only 0.08%. The porosity of the sealing layer increases with the increase of the welding speed. When the welding speed is 80, 90, 100 and 110 mm/min, the porosity is 0.02, 0.08, 0.63 and 0.89%, respectively. These studies can provide a theoretical basis for laser sealing manufacturing of vacuum plate glazing. |
format | Online Article Text |
id | pubmed-6600737 |
institution | National Center for Biotechnology Information |
language | English |
publishDate | 2019 |
publisher | MDPI |
record_format | MEDLINE/PubMed |
spelling | pubmed-66007372019-07-16 The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing Zhang, Shanwen Li, Chong Miao, Hong He, Qiang Materials (Basel) Article To explore the mechanism of the pore formation in the laser-welded vacuum plate glazing sealing layer, a vacuum plate glazing laser side sealing test was carried out. The influence of the pulse current, pulse duration time, pulse frequency and welding speed on the pores of the sealing layer was studied by means of scanning electron microscopy (SEM) and metallographic microscopy, and the cause of the pores is analyzed. The results show that the porosity decreases with the increase of the pulse current. When the pulse current is 160 A, the pores are the fewest and smallest, and the porosity is only 0.1%. The porosity of the sealing layer decreases first and then increases with the increase of the pulse duration time. The porosity decreases first and then increases with the increase of the pulse frequency. When the pulse frequency is 18 Hz, the porosity is the least, at only 0.08%. The porosity of the sealing layer increases with the increase of the welding speed. When the welding speed is 80, 90, 100 and 110 mm/min, the porosity is 0.02, 0.08, 0.63 and 0.89%, respectively. These studies can provide a theoretical basis for laser sealing manufacturing of vacuum plate glazing. MDPI 2019-06-02 /pmc/articles/PMC6600737/ /pubmed/31159507 http://dx.doi.org/10.3390/ma12111790 Text en © 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). |
spellingShingle | Article Zhang, Shanwen Li, Chong Miao, Hong He, Qiang The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title | The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title_full | The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title_fullStr | The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title_full_unstemmed | The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title_short | The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing |
title_sort | influence of welding process parameters on pore formation in pulsed laser-welded vacuum plate glazing |
topic | Article |
url | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6600737/ https://www.ncbi.nlm.nih.gov/pubmed/31159507 http://dx.doi.org/10.3390/ma12111790 |
work_keys_str_mv | AT zhangshanwen theinfluenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT lichong theinfluenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT miaohong theinfluenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT heqiang theinfluenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT zhangshanwen influenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT lichong influenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT miaohong influenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing AT heqiang influenceofweldingprocessparametersonporeformationinpulsedlaserweldedvacuumplateglazing |