Effects of Anions and pH on the Stability of ZnO Nanorods for Photoelectrochemical Water Splitting

[Image: see text] This work demonstrates the improved stability of zinc oxide nanorods (ZnO NRs) for the photoanode of solar water splitting under voltage biases by the addition of borate or carbonate ions in the aqueous electrolyte with suitable pH ranges. The ZnO NRs prepared by the hydrothermal method are highly active and stable at pH 10.5 in both borate and carbonate buffer solutions, where a photocurrent higher than 99% of the initial value has been preserved after 1 h polarization at 1.5 V (vs reversible hydrogen electrode) under AM 1.5G. The optimal pH ranges with a minimum morphological change of ZnO NRs for photoelectrochemical (PEC) water splitting in borate and carbonate buffer solutions are 9–13 and 10–12, respectively. The working pH range for PEC water splitting on ZnO NR photoanodes can be extended to 8.5–12.5 by the combination of borate and carbonate anions. The lifetime of ZnO NR photoanodes can be synergistically prolonged for over an order of magnitude when the electrolyte is the binary electrolyte consisting of borate and carbonate in comparison with these two anions used individually. On the basis of the experimental results, a possible mechanism for the protective behavior of ZnO in borate and carbonate solutions is proposed. These findings can be used to improve the lifetime of other high-performance ZnO-based catalysts and to understand the photocorrosive and protective behaviors of ZnO NRs in the borate and carbonate solutions.