Synthesis, Reduction, and Electrical Properties of Macroporous Monolithic Mayenite Electrides with High Porosity

[Image: see text] Room-temperature stable macroporous mayenite electride (C12A7:e(–)) has been successfully prepared via a sol–gel method accompanied by phase separation, followed by heat-treatment and reduction processes. The obtained xerogel monoliths possess controllable macrostructure and a porosity of more than 60%, depending on adjusting the amount of poly(ethylene oxide) as a phase separation inducer. Heat-treatment allows the formation of multicrystals Ca(12)Al(14)O(32)Cl(2) and Ca(12)Al(14)O(33) (C12A7), and the porosity increases to 78.67% after being heat-treated at 1100 °C. Further reduction promotes the transformation from Ca(12)Al(14)O(32)Cl(2) or C12A7 to C12A7:e(–) as well as the conversion from an insulator to a semiconductive electride. The carrier concentration of the electride reaches 3.029 × 10(18) cm(–3) after being reduced at 1100 °C under Ar atmosphere, and the porosity still remains 66%. The macrostructure of the resultant mayenite electride before and after heat-treatment and reduction is perfectly preserved, indicating that the obtained macroporous monolithic mayenite electride could be utilized in the electronic components.