Facile Fabrication of Au Nanoparticles/Tin Oxide/Reduced Graphene Oxide Ternary Nanocomposite and Its High-Performance SF(6) Decomposition Components Sensing

A high-performance sensor for detecting SF(6) decomposition components (H(2)S and SOF(2)) was fabricated via hydrothermal method using Au nanoparticles/tin oxide/reduced graphene oxide (AuNPs-SnO(2)-reduced graphene oxide [rGO]) hybrid nanomaterials. The sensor has gas-sensing properties that responded and recovered rapidly at a relatively low operating temperature. The structure and micromorphology of the prepared materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Raman spectroscopy, energy-dispersive spectroscopy (EDS), and Brunauer-Emmett-Teller (BET). The gas-sensing properties of AuNPs-SnO(2)-rGO hybrid materials were studied by exposure to target gases. Results showed that AuNPs-SnO(2)-rGO sensors had desirable response/recovery time. Compared with pure rGO (210/452 s, 396/748 s) and SnO(2)/rGO (308/448 s, 302/467 s), the response/recovery time ratios of AuNPs-SnO(2)-rGO sensors for 50 ppm H(2)S and 50 ppm SOF(2) at 110°C were 26/35 s and 41/68 s, respectively. Furthermore, the two direction-resistance changes of the AuNPs-SnO(2)-rGO sensor when exposed to H(2)S and SOF(2) gas made this sensor a suitable candidate for selective detection of SF(6) decomposition components. The enhanced sensing performance can be attributed to the heterojunctions with the highly conductive graphene, SnO(2) films and Au nanoparticles.