Effect of the Iron Reduction Index on the Mechanical and Chemical Properties of Continuous Basalt Fiber

Basalt glass belongs to the iron-rich aluminosilicate glass system; thus, the iron content and the iron redox index (IRI=Fe(2+)/Fe(total)) influence the viscosity, density, mechanical and chemical properties of basalt fiber (BF). In this work, continuous BFs with IRIs ranging from 0.21–0.87 were prepared by adding a different amount of redox agents. An economical and easily accessible testing method—the spectral photometric method with 1,10-phenanthroline—is applied to measure the IRI with convinced accuracy, which has been approved by Mössbauer spectra and X-ray fluorescence analysis. The tensile strength of the BF samples increases approximately linearly with increasing IRI as a function of [Formula: see text]. The FT-IR results indicate that, with increasing IRI, the ferric ions are replaced by the much stronger network formers (Al(3+) and Si(4+)), hence the increased the tensile strength. The X-ray diffraction results show an amorphous nature of BF samples. Moreover, the tensile strength is significantly decreased after the alkali corrosion, which is partly attributed to the severe surface damaging according to the SEM results. This work proved the feasibility of mechanical property improvement in BF production by controlling the iron redox index.