Use of a LHFB Device for Testing Mode III in a Composite Laminate

The present paper studies the fatigue delamination behaviour of an epoxy/carbon composite material under mode III loading using a longitudinal half fixed beam (LHFB) device initially designed for mode III static tests of composite materials formed by the stacking of plies. For this purpose, a series of tests was carried out at different levels of loading representative of the fatigue behaviour of the material, from the crack onset phase through the delamination phase to final fracture. The experimental results were treated statistically, obtaining the values of the fatigue limit for probabilities of fracture of 5% and 50%. Finally, a fractographic analysis of the fracture surfaces was performed which allowed us to identify the same characteristic patterns of static mode III fracture, namely broken fibres, cusps and saw-teeth, in addition to a new morphology consisting of the formation of agglomerations of resin produced by the friction between the lips of the specimen in the fracture zone that point to dynamic mode III fracture. These agglomerations eventually crack and become detached from the fibres, leaving these free of resin.