Cargando…
Noise reduction in dual‐energy computed tomography virtual monoenergetic imaging
PURPOSE: Virtual monoenergetic images (VMIs) derived from dual‐energy computed tomography (DECT) have been explored for several clinical applications in recent years. However, VMIs at low and high keVs have high levels of noise. The aim of this study was to reduce image noise in VMIs by using a two‐...
Autores principales: | , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
John Wiley and Sons Inc.
2019
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6753738/ https://www.ncbi.nlm.nih.gov/pubmed/31390137 http://dx.doi.org/10.1002/acm2.12694 |
Sumario: | PURPOSE: Virtual monoenergetic images (VMIs) derived from dual‐energy computed tomography (DECT) have been explored for several clinical applications in recent years. However, VMIs at low and high keVs have high levels of noise. The aim of this study was to reduce image noise in VMIs by using a two‐step noise reduction technique. METHODS: VMI was first denoised using a modified highly constrained backprojection (HYPR) method. After the first‐step denoising, a general‐threshold filtering method was performed. Two sets of anthropomorphic phantoms were scanned with a clinical dual‐source DECT system. DECT data (80/140Sn kV) were reconstructed as VMI series at 12 different energy levels (range, 40‐150 keV, interval, 10 keV). For comparison, the averaged VMIs obtained from 10 repeated DECT scans were used as the reference standard. The signal‐to‐noise ratio (SNR), contrast‐to‐noise ratio (CNR) and root‐mean‐square error (RMSE) were used to evaluate the quality of VMIs. RESULTS: Compared to the original HYPR method, the proposed two‐step image denoising method could provide better performance in terms of SNR, CNR, and RMSE. In addition, the proposed method could achieve effective noise reduction while preserving edges and small structures, especially for low‐keV VMIs. CONCLUSION: The proposed two‐step image denoising method is a feasible method for reducing noise in VMIs obtained from a clinical DECT scanner. The proposed method can also reduce edge blurring and the loss of intensity in small lesions. |
---|