Cm(III) retention by calcium silicate hydrate (C-S-H) gel and secondary alteration phases in carbonate solutions with high ionic strength: A site-selective TRLFS study

We studied the Cm(III) retention by calcium silicate hydrate (C-S-H), portlandite (Ca(OH)(2)) and their alteration products calcite, vaterite, and aragonite in high ionic strength carbonate-containing solutions representing specific formation waters. For this, we synthesized C-S-H gels with calcium to silicon (C/S) ratios of 1.0 and 2.0 in the absence and presence of Cm(III), resulting in Cm(III)-free and Cm(III) doped C-S-H gel, respectively. For phase identification purposes we applied X-ray diffraction (XRD) while for the identification of the Cm(III)/C-S-H binding mode we applied site-selective time-resolved laser-induced luminescence spectroscopy (TRLFS). The stability of Cm(III) doped phases under repository-relevant conditions was evaluated by studying the time-dependent release of Cm(III) from the Cm(III) doped C-S-H gel into leaching solutions containing 0.02 M NaHCO(3) or 2.5 M NaCl/0.02 M NaHCO(3) over 60 d. Speciation changes of Cm(III) due to leaching were followed with TRLFS while C-S-H structure alterations and secondary phase formation were monitored with XRD. From the results it could be concluded that Cm(III) is not mobilized by aqueous carbonate but either remains incorporated in the C-S-H structure and portlandite or becomes partially re-immobilized into secondary CaCO(3) phases. The presence of NaCl led to an accelerated conversion of metastable secondary CaCO(3) phases into calcite.