Robust Detection for Chipless RFID Tags Based on Compact Printable Alphabets

This work presents a novel technique for designing chipless radio frequency identification (RFID) tags which, unlike the traditional tags with complex geometries, are both compact and printable. The tags themselves are alphabets, which offers the advantage of efficient visual recognition of the transmitted data in real-time via radio frequency (RF) waves. In this study, the alphabets (e.g., a, b and c) are realized by using copper etching on a thin dielectric substrate (TLX-8) backed by a ground plane. It is shown that the original signature of the frequency response of the backscattered radar cross-section (RCS) of the letter, displays dips that are unique to the individual letters. The tags have been simulated, fabricated and their monostatic cross-sections have been measured by using a dual-polarized Vivaldi antenna in the frequency band ranging from 6 to 13 GHz. The study also includes, for the first time, a detailed analysis of the impact of changing the shape of the tag owing to variation in the font type, size, spacing, and orientation. The proposed letters of the alphabet are easily printable on the tag and provide an efficient way to visually recognized them and, hence, to detect them in a robust way, even with a low coding density of 2.63 bit/cm(2). The advantages of the proposed novel identification method, i.e., utilization of the both co- and cross-polar RCS characteristics for the printable clipless RFID tags are the enhancement of the coding density, security and better detection of the alphabet tags with different fonts by capturing the tag characteristics with better signal to noise ratio (SNR). Good agreement has been achieved between the measured and simulated results for both co- and cross-polarized cases.