Experimental Resin-Based Monoblock Endodontic Obturation System

OBJECTIVE: The aim of the present study was to characterize a novel resin-based monoblock endodontic obturation system consisting of a polymeric cone and a resin-based endodontic sealer. METHODS: The preliminary tests performed for the experimental cone were as follows: cohesive strength, dimensional stability, standardization of the diameter and taper, calcium ion release, and radiopacity, for the characterization of the experimental sealer, film thickness and flow tests were performed. Tests were performed according to the American National Standards Institute/American Dental Association (ANSI/ADA) Standards Nos. 57 and 78. The experimental cone was compared to gutta-percha, whereas the experimental sealer was compared to AH Plus. Data were analyzed by Student's t-test (α = 0.05). RESULTS: The experimental cone had superior values for cohesive strength and dimensional stability compared to gutta-percha. Regarding calcium ion release, the experimental system continued to release calcium ions after 30 days. Film thickness was similar for both endodontic sealers; conversely, the experimental resin-based sealer achieved higher values for flow compared to AH Plus. CONCLUSION: The experimental resin-based monoblock obturation system fully met the requirements of the ANSI/ADA Standard No. 78 and the ANSI/ADA Standard No. 57, except for radiopacity. Considering this, further studies are still needed to evaluate other radiopacifiers and the effect of their incorporation on the physicochemical properties of this novel resin-based monoblock endodontic obturation system.