Cortical Bone Trajectory Screws for Fixation Across the Cervicothoracic Junction: Surgical Technique and Outcomes

STUDY DESIGN: Clinical case series describing a novel surgical technique. OBJECTIVE: Stabilization across the cervicothoracic junction (CTJ) poses technical difficulties which make this procedure challenging. The transition from cervical lordosis to thoracic kyphosis and the orientation of the lateral masses of the cervical spine compared with the pedicles of the thoracic spine create the need to accommodate for 2 planes of alignment when placing instrumentation. A novel surgical technique for instrumentation across the cervicothoracic junction is described. METHODS: The use of cortical bone trajectory (CBT) technique for pedicle fixation in the upper thoracic spine is described in combination with cervical lateral mass or pedicle screws. The application in our first 12 patients for stabilization across the CTJ is described. Two case presentations illustrate the technique. RESULTS: All the patients had rod screw constructs without the need to skip levels, there was no requirement for transverse connectors and only 1 plane of contouring was required. CONCLUSIONS: The use of CBT technique has not been described for the upper thoracic spine. This technique avoids many technical problems associated with posterior instrumentation of the CTJ. The facility of their use in this application arises from the similar coronal plane entry points as the cervical lateral mass screws compared with the more lateral starting point of traditional thoracic pedicle screws. The technique has clinical equipoise to traditional thoracic pedicle screw insertion but with the benefits of an easier ability to perform the instrumentation and saving levels of fusion.