Sustainable synthesis of graphene-based adsorbent using date syrup

Here we demonstrate, a facile in-situ strategy for the synthesis of environmentally benign and scalable graphene sand hybrid using date syrup as a sustainable carbon source through pyrolysis at 750 °C. Raman and SEM images revealed that the as-prepared date syrup-based graphene sand hybrid (D-GSH) had imperfections with macroporous 2-D graphene sheet-like structures stacked on the inorganic sand support. The applicability of the D-GSH for decontaminating the water from cationic (Methyl Violet, MV) and anionic (Congo Red, CR) dye and heavy metals (Pb(2+) and Cd(2+)) was tested. Batch experiments demonstrated that D-GSH showcased exceptional capability for both dye and heavy metals removal with fast adsorption following pseudo-second-order kinetics. The adsorption capacities for MV, Pb(2+), and Cd(2+) were respectively 2564, 781 and 793 mg/g at 25 °C, the highest capacity graphene-based adsorbent reported in the literature to date. In addition, D-GSH also exhibited high adsorption capacity for anionic dye, CR (333 mg g(−1)) and good recyclability (3 cycles) for all the contaminants. The thermodynamic studies further confirmed that the adsorption of all contaminants was thermodynamically feasible, spontaneous and endothermic with ∆H° of 48.38, 89.10, 16.89 and 14.73 kJ/mol for MV, CR, Pb(2+) and Cd(2+), respectively. Thus, utilization of a simple one-step strategy to produce graphenic sand hybrid using date syrup helped in developing a cost-effective and environmentally friendly dye and heavy metal scavenger that can be used as a one-step solution for water decontamination.