Reducing Interface Traps with High Density Hydrogen Treatment to Increase Passivated Emitter Rear Contact Cell Efficiency

In this work, a high-density hydrogen (HDH) treatment is proposed to reduce interface traps and enhance the efficiency of the passivated emitter rear contact (PERC) device. The hydrogen gas is compressed at pressure (~ 70 atm) and relatively low temperature (~ 200 °C) to reduce interface traps without changing any other part of the device’s original fabrication process. Fourier-transform infrared spectroscopy (FTIR) confirmed the enhancement of Si–H bonding and secondary-ion mass spectrometry (SIMS) confirmed the SiN/Si interface traps after the HDH treatment. In addition, electrical measurements of conductance-voltage are measured and extracted to verify the interface trap density (Dit). Moreover, short circuit current density (Jsc), series resistance (Rs), and fill factor (F.F.) are analyzed with a simulated light source of 1 kW M(−2) global AM1.5 spectrum to confirm the increase in cell efficiency. External quantum efficiency (EQE) is also measured to confirm the enhancement in conversion efficiency between different wavelengths. Finally, a model is proposed to explain the experimental result before and after the treatment.