Investigation on the Thermal Conductivity of Mineral Oil-Based Alumina/Aluminum Nitride Nanofluids

Al(2)O(3)/AlN–mineral oil nanofluids were prepared by dispersing commercially available Al(2)O(3) and AlN nanoparticles into mineral oil. SEM measurements showed that the average diameter of the Al(2)O(3) and AlN nanoparticles was about 55 and 50 nm, respectively. The experiments showed that the thermal conductivity systematically improved as the Al(2)O(3) and AlN nanoparticles were introduced into the mineral oil. The thermal conductivity of the mineral oil-based nanofluids increased by 18% with a 1% volume fraction of Al(2)O(3) and increased by 7% with a 0.5% volume fraction of AlN. The experimental data were compared with the values that were predicted by four typical thermal conductivity models, and a large disparity was disclosed between the models and the experimental data. After considering the thermal dynamic factors in the Al(2)O(3)/AlN–mineral oil nanofluids, a universal model is proposed that agrees well with the variation of thermal conductivity of the nanofluids.