Application of Zeolite Tuffs as Mineral Filler in Warm Mix Asphalt

Zeolite materials are used in the warm mix asphalt technology as an asphalt foaming additive, which partially replaces the filler. This article analyzes the influence of the zeolite and other fillers addition on the properties of mastic asphalt. In the research, 35/50 penetration grade asphalt and three types of fillers were used: lime filler (L), zeolite tuff (clinoptilolite) (C), hydrated lime (H) and their mixed combinations (C:L in 1:1 and 1:3 proportions as well as C:L:H in 2:2:1 ratio). The characteristics of the materials included: chemical analysis, phase composition and particle size distribution. The following properties were determined on the asphalt mastic samples: penetration, softening point, penetration index, dynamic viscosity and stiffening measured by softening point increase. It was found that clinoptilolite could partially replace the traditional lime filler, without a negative impact on the asphalt mastic properties. Additionally, the hydrated lime inclusion should have a positive effect on the frost resistance of an asphalt mix.