Laves Phase Evolution in China Low-Activation Martensitic (CLAM) Steel during Long-Term Aging at 550 °C

To clarify the precipitation and evolution law of the Laves phase in China low-activation martensitic (CLAM) steel during long-term aging at high temperature, this paper carried out an aging treatment of CLAM steel at 550 °C for up to 30,000 h. The segregation behavior of alloy elements and the precipitation amount and average size of the Laves phase were quantitatively characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), and the precipitation and coarsening behavior of the Laves phase were obtained. The results show that the Laves phase begins to precipitate within 5000 h after aging and mainly depends on M(23)C(6) carbides to nucleate and grow at the grain boundary and subgrain boundary. During the aging process, the average size of the Laves phase grows continuously. After more than 25,000 h, the growth rate of the Laves phase decreases. After 30,000 h of aging, the average size reaches 439.9 nm, and the maximum size exceeds 800 nm. The area fraction of the Laves phase increases continuously during the 20,000 h aging process and tends to be stable after aging for 20,000 h. The area fraction is approximately 1.85%.