Technical note: sensitivity analysis of the SCoRE and SARA methods for determining rotational axes during tibiofemoral movements using optical motion capture

PURPOSE: The first aim was to report the sensitivity of calculated tibiofemoral movements for the choice of placement of the set of femoral markers. The second aim was to report the influence of accuracy of the motion captured positions of the markers on the calculated tibiofemoral movements. METHODS: Tibiofemoral kinematics during single leg hops for distance were calculated. For the first aim, an experiment was conducted in which four different setups of the femoral markers were used to calculated tibiofemoral movements. For the second aim, an experiment was conducted in which all raw marker positions were mathematically moved independently with the known Vicon position error with a distance and in a random direction in each frame, repeated a hundred times. Each time, the tibiofemoral movements were calculated. RESULTS: The first experiment yields that the standard deviation of the calculated anterior tibia translation between marker setups was 0.88 mm and the standard deviation of the external tibia rotation between marker setups was 0.76 degrees. The second experiment yields that the standard deviation was 0.76 mm for anterior tibia translation and 0.38 degrees for external tibia rotation. CONCLUSION: A combined standard deviation of both experiments revealed that transients in anterior tibia translation less than 2.32 mm and external tibia rotations less than 1.70 degrees should be taken with caution. These results are 19.42% of the range of the anterior tibia translation and 13.51% of the rotation range during the jump task. The marker setup should be chosen carefully.