Low-Cost One-Step Fabrication of Highly Conductive ZnO:Cl Transparent Thin Films with Tunable Photocatalytic Properties via Aerosol-Assisted Chemical Vapor Deposition

[Image: see text] Low-cost, high-efficiency, and high quality Cl-doped ZnO (ZnO:Cl) thin films that can simultaneously function as transparent conducting oxides (TCOs) and photocatalysts are described. The films have been fabricated by a facile and inexpensive solution-source aerosol-assisted chemical vapor deposition technique using NH(4)Cl as an effective, cheap, and abundant source of Cl. Successful Cl(O) substitutional doping in the ZnO films was evident from powder X-ray diffraction, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry results, while scanning electron microscopy reveals the impact of Cl doping on the ZnO thin film morphology. All ZnO:Cl films deposited were transparent and uncolored; optical transmittance in the visible region (400–700 nm) exceeded 80% for depositions using 5–20 mol % Cl. Optimal electrical properties were achieved when using 5 mol % Cl with a minimum measured resistivity of (2.72 ± 0.04) × 10(–3) Ω·cm, in which the charge carrier concentration and mobility were measured at (8.58 ± 0.16) × 10(19) cm(–3) and 26.7 ± 0.1 cm(2) V(–1) s(–1) respectively, corresponding to a sheet resistance (R(sh)) of 41.9 Ω□(–1) at a thickness of 650 nm. In addition to transparent conducting properties, photocatalytic behavior of stearic acid degradation in the ZnO:Cl films was also observed with an optimal Cl concentration of 7 mol % Cl, with the highest formal quantum efficiency (ξ) measured at (1.63 ± 0.03) × 10(–4) molecule/photon, while retaining a visible transparency of 80% and resistivity ρ = (9.23 ± 0.13) × 10(–3) Ω·cm. The dual functionality of ZnO:Cl as both a transparent conductor and an efficient photocatalyst is a unique combination of properties making this a particularly unusual material.