A Process Optimization and Performance Study of Environmentally Friendly Waste Newspaper/Polypropylene Film Layered Composites

Waste newspaper are currently used in a single way and have low utilization rates. In this paper, the optimal process of preparing environmentally friendly layered composites by using waste newspaper combined with polypropylene film lamination was studied. The effects of hot-pressing temperature, hot-pressing time and paper content on the properties of the composites were analyzed. The results showed that under the process conditions of hot-pressing temperature 180 °C, compression time 20 min and paper content 66.7%, the obtained composite material had a flexural strength of 126 MPa, a tensile strength of 95 MPa, an impact strength of 5.3 kJ/m(2) and a water absorption thickness expansion ratio of 3.2%. Tensile performance increased by 164% compared to the original waste newspaper. Compared to our previous work, the hot processing time had been cut in half and costs were lower. In terms of creep properties, the unrecoverable strain rate was reduced by 57.5% compared to pure polypropylene. The results show that the material can maintain excellent flexural strength, tensile strength and water absorption performance while making good use of waste newspaper.