Cargando…

Analysis of pesticide residues in commercially available chenpi using a modified QuEChERS method and GC-MS/MS determination

To ensure the safety of the commercially available chenpi, a convenient and fast analytical method was developed for the determination of 133 pesticide residues in chenpi using gas chromatography-tandem mass spectrometry (GC-MS/MS). In this study, different extraction solvents, redissolution solvent...

Descripción completa

Detalles Bibliográficos
Autores principales: Li, Shuang, Yu, Peipei, Zhou, Ceng, Tong, Ling, Li, Dongxiang, Yu, Zhiguo, Zhao, Yunli
Formato: Online Artículo Texto
Lenguaje:English
Publicado: Xi'an Jiaotong University 2020
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7037570/
https://www.ncbi.nlm.nih.gov/pubmed/32123600
http://dx.doi.org/10.1016/j.jpha.2019.01.005
Descripción
Sumario:To ensure the safety of the commercially available chenpi, a convenient and fast analytical method was developed for the determination of 133 pesticide residues in chenpi using gas chromatography-tandem mass spectrometry (GC-MS/MS). In this study, different extraction solvents, redissolution solvents and adsorbents were tested according to the recovery and purification effect to obtain a modified QuEChERS method. The samples were extracted with acetonitrile. During the clean-up step, octadecyl-modified silica (C18) and graphitized carbon black (GCB) were selected, and aminopropyl (NH(2)) was used instead of primary secondary amine (PSA) because of its weaker ion exchange capacity which had little effect on the recovery of ditalimfos. Samples were quantified by matrix-matched calibration with internal standards. All pesticides showed good linearity in the respective range, both with values of r(2) > 0.99. The average recoveries of the pesticides spiked samples ranged from 70.0% to 112.2% with the RSDs of 0.2%–14.4%. The modified QuEChERS method was validated and applied to twenty real samples. Five pesticides were found in eight batches, but no pesticide exceeded the maximum residue limits (MRL, MRL reference to European commission).