A Novel Non-enzymatic Biosensor Based on Ti-Metallic Glass Thin Film: The Blood Glucose Oxidation Approach

BACKGROUND: Material selection is a key issue for the fabrication of non-enzymatic electrode in glucose biosensors. Metallic glass (MG) as an advanced innovative material can provides many basic structural requirements of electrodes. A novel non-enzymatic biosensor based on Ti(57)Cu(28){Zr(0.95)−Hf(0.05)}(X)Si(15-X) MG (Ti-MG) thin film was introduced for glucose oxidation. METHODS: The Ti-MG thin film was deposited on the carbon substrate of screen-printed carbon electrode (SPCE), and the Ti-MG modified SPCE was fabricated as Ti-MG/SPCE. The morphology and structure of the Ti-MG thin film were characterized by field emission scanning electron microscope and X-ray diffraction. Electrochemical evaluations were studied by electrochemical impedance spectroscopy and cyclic voltammetry. RESULTS: The Ti-MG was sputtered on the carbon substrate in the form of a porous spongy thin film with 285 nm thickness and nanoparticles with average diameter size of 110 nm. The Ti-MG/SPCE showed low charge transfer resistance to the electron transfer and high electrocatalytic activity toward the oxidation of glucose in PBS (pH = 7.4) solution. This biosensor exhibited good analytical performance with a linear range from 2 to 8 mM glucose and sensitivity of 0.017 μA mM(−1). CONCLUSION: The experimental results indicate that Ti-MG thin film has a high ability to electron transfer and glucose oxidation for the development of non-enzymatic glucose biosensors.