Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Heat treatment is a green, environmentally friendly and mild pyrolysis process that improves the dimensional stability and durability of wood. In this study, Larix spp. Samples were heated at 180 °C and 210 °C for 6 h with nitrogen, air or oil as heat-conducting media. The influence of high-temperature heat treatment on the microstructure, chemical components, and micromechanical properties was investigated. The mass loss rate increased with increasing temperature, and the degradation of wood components resulted in cracks in the cell walls. Samples treated with air showed more cracks in cell walls than were observed in the cells walls of wood treated with the other heat-conducting media. The hardness of the cell walls increased after all heat treatments. In addition, the results showed that heat treatment reduced creep behavior compared to that of untreated wood.