Properties of Injection Molded Biocomposites Reinforced with Wood Particles of Short-Rotation Aspen and Willow

Injection molded biocomposite specimens were prepared by using four different weight percentages, i.e., 10%, 20%, 30%, and 40% of aspen (Populus tremula L.) and willow (Salix caprea L.) wood particles in a biopolymeric matrix. Dog-bone test specimens were used for testing the physical, mechanical, and thermal properties, and microstructure of biocomposites. The tensile and bending strength changed with the change in weight percentages of wood particles and the bending stiffness increased with the increasing weight percentage of wood. In Brinell hardness, similar changes as a function of wood particle weight percentage were shown, and a relationship between hardness and tensile strength with wood content was also investigated. The prepared biocomposites could be an alternative for plastic-based materials and encourage the use of fast growing (aspen and willow) wood from short-rotation forests in biocomposites.