Prolonged UV-C Irradiation is a Double-Edged Sword on the Zirconia Surface

[Image: see text] Zirconia has become an excellent choice of dental implants because of its excellent mechanical strength, aesthetic, and biocompatibility. Although some studies have shown ultraviolet (UV) irradiation is effective to photofunctionalize dental zirconia that can improve osteoblastic function, the scattered information has not identified the most effective exposure time and wavelength of UV. Herein, this study has investigated the effects of UV irradiation on zirconia after UV-A (365 nm) or UV-C (243 nm) photofunctionalization for different times (15 min, 3 and 24 h). After irradiation, the zirconia surface was analyzed by color spectrophotometry, scanned electron microscopy (SEM), energy-dispersive X-ray spectrometry, water contact angle (WCA) with goniometer, and X-ray diffraction. Osteoblastic (MC3T3-E1) cells were cultured on zirconia discs and evaluated with a CCK-8 test kit for cell proliferation (3 h and 1 day) and with alkaline phosphatase (ALP) activity (14 days). Significant color change (ΔE) was observed by irradiating with UV-C for 15 min (1.99), 3 h (1.92), and 24 h (3.35), whereas only minute changes were observed with UV-A (respectively, ΔE: 0.18, 0.14, 0.57). No surface textural changes were observed nor a monoclinic phase was detected on both the UV-A and UV-C irradiated samples. UV-C significantly decreased the C/Zr ratios and WCA, with irradiating for 24 h presenting the lowest values, and it was the only condition to give significantly higher ALP activity at 14 days (p < 0.05) and CCK-8 values for 1 day culture (p < 0.05). It is concluded that UV-C (but not UV-A) irradiation can significantly change the aesthetic in color, and only prolonged 24 h UV-C irradiation can enhance MC3T3-E1 cell adhesion on zirconia by photofunctionalization.