Semi-quantitative determination of ash element content for freeze-dried, defatted, sulfated and pyrolysed biomass of Scenedesmus sp.

BACKGROUND: Energy demand by mankind has become one of the most important aspects of our society. A promising technology that seeks to provide part of the energy demand and to obtain high-value products is the thermochemical conversion of microalgae biomass. Inorganic species presented in microalgae biomass may act as catalysts for thermochemical reactions and are responsible for notorious ash-related issues during thermochemical decomposition. RESULTS: In this study, the freeze-dried biomass of Scenedesmus sp. was used to evaluate the lipid extraction methodology regarding a sonication bath as pretreatment technique for cell disruption followed by vortex mixing and n-hexane as solvent. It is also presented the lipid and amino acid profiles for Scenedesmus sp. The freeze-dried biomass was pyrolysed through a TGA (thermogravimetric analysis), with heating rates of 20 °C/min, from 100 to 650 °C. The ash and sulfated ash contents were accurately determined by combustion of biomass in a muffle furnace. The element component of ashes of the freeze-dried, defatted, pyrolysed and sulfated biomasses was determined by means of scanning electron microscope (SEM) fitted with energy dispersive spectroscopy (EDS). The lipid content obtained for Scenedesmus sp. dry biomass was 16.72% (± 0.03). The content of the sulfated ash obtained was 17.81 ± 0.15%. The SEM–EDS technique identified different mineral compounds in ashes, allowing to quantify Mg, P, S, K, Ca, Fe, Co and Br, as well as oxides. CONCLUSION: The results suggest a possible strategy to evaluate in a semi-quantitative manner the ash composition of freeze-dryed, defatted, sulfated and pyrolysed biomass of Scenedesmus sp. and its feasibility in using Scenedesmus sp. biomass in different thermochemical conversion strategies to achieve processes with positive energy ratio, representing potential use both environmental and energetically.