Large Suspended Monolayer and Bilayer Graphene Membranes with Diameter up to 750 µm

In this paper ultra clean monolayer and bilayer Chemical Vapor Deposited (CVD) graphene membranes with diameters up to 500 µm and 750 µm, respectively have been fabricated using Inverted Floating Method (IFM) followed by thermal annealing in vacuum. The yield decreases with size but we show the importance of choosing a good graphene raw material. Dynamic mechanical properties of the membranes at room temperature in different diameters are measured before and after annealing. The quality factor ranges from 200 to 2000 and shows no clear dependence on the size. The resonance frequency is inversely proportional to the diameter of the membranes. We observe a reduction of the effective intrinsic stress in the graphene, as well as of the relative error in the determination of said stress after thermal annealing. These measurements show that it is possible to produce graphene membranes with reproducible and excellent mechanical properties.