Preoperative Assessment of the Feasibility of Pedicle Screw Insertion at the Proximal Thoracic Curve in Lenke Type 2 Idiopathic Scoliosis

STUDY DESIGN: Retrospective cohort study. OBJECTIVES: To investigate the feasibility of inserting pedicle screws in the proximal thoracic (PT) curve in Lenke type 2 idiopathic scoliosis, using post-myelography computed tomography (CT). METHODS: Post-myelography CT images of 46 Japanese patients, 10 to 30 years old, who underwent surgery for Lenke type 2 idiopathic scoliosis were analyzed. A new parameter “SAPS” (space available for pedicle screw) was introduced, which defines the minimal distance between the lateral cortex of the pedicle and the spinal cord, with a SAPS <4.5 mm being “unacceptable.” All 460 pedicles (T2 through T6) were analyzed. Pedicle diameter was classified according to the Akazawa grading system. RESULTS: Most pedicles on the right side at T3 (84.8%) and T4 (97.8%) were unacceptable. The unacceptable rate was 58.7% and 15.2% on the right side at T5 and T6, respectively. A larger Cobb angle of the PT curve was associated with a greater incidence of unacceptable SAPS at these levels. For a Cobb angle of the PT curve >40°, most right T5 pedicles were unacceptable. On the left side, most pedicles from T2 to T5 were acceptable. When T5 was the caudal end vertebra of the PT curve, the left T6 pedicles had an unacceptable SAPS in some cases. When the width of the pedicle channel was ≥2 mm (Akazawa grade 1 or 2), all pedicles from T2 to T6, on both sides, were acceptable. CONCLUSIONS: Post-myelography CT enabled us to clearly demonstrate the feasibility of inserting pedicle screws in the PT region.